Firepro Fire Stop Boxes The Fire Stop Box is an intumescent type product designed to prevent the spread of fire through service penetrations. Think of them as fire rated holes. They have been tested rigorously with a multitude of service types, service configurations, and wall and floor types.
Fire Stop Box Tech Manual V3.100918.pdf
(949200 Bytes)
Download
|
P240 Ceramic Wool Blanket P240 Ceramic Wool Blanket is a high temperature flexible insulating material. It is lightweight and soft to touch. It has good refractory, fire stopping and insulation properties. It is also used for filtering hot gases and liquids.
For most uses 25mm thick blanket of 96Kg/M3 density is required.
Size: 7.2M x 0.6M x 25mm.
p240.pdf
(75275 Bytes)
Download
|
FF109 Fire Rated Downlight Cover Down-lights used in fire-rated ceilings are subject to fire regulation. The FF109 Downlight Cover has been developed to provide maximum protection and ease of fitting for small/medium sized downlights.
In a fire situation, the cover expands internally to fill the available space with fire-resistant insulating material.
ff109.pdf
(2022468 Bytes)
Download
|
FF130 Flanged Loft Cone for Downlights Recessed halogen downlights are used in many homes and businesses. Although they give the attractive crisp white light which makes them very popular, they also represent a potential fire hazard, especially when buried in loft insulation.
Numerous house fires have been caused by the ignition of combustibles in ceiling spaces caused by hot downlights being mistakenly covered with loft insulation and for this reason the regulation for fitting downlights has been tightened, this legislation is covered by AS/NZS 3000:2007.
ff130.pdf
(1362550 Bytes)
Download
|
Firepro B235 Fire Pillows Used wherever openings require reinstatement whether or not penetrated by pipes or cable services.
Sizes:
Large 240mm x 240mm
Small 100mm x 240mm
b235.pdf
(61306 Bytes)
Download
|
Firepro B360, B362 Flush box When correctly installed, B360 provides up to 2hrs and B361 up to 1hr F.R.R. in plasterboard walls of equivalent fire resistance. B362 are the insert pads only.
Note: Intumescent Insert Pads can be designed for special applications, ie Fire Alarm Panels.
b360-361-362.pdf
(88044 Bytes)
Download
|
Firepro M706 A one-part fire-rated sealant to perform as a barrier against fire penetrating expansion joints. Cleans-up in water. With an acoustic rating of STC65. For gaps up to 50mm depending upon joint type.
Sizes:
300mL Cartridges
600mL Sausages
10L Pails.
m706.pdf
(174260 Bytes)
Download
|
Firepro M707 A one-part, waterborne, high performance interior/exterior fire protective and acoustic sealant. Cleans-up in water. With an acoustic rating of STC55.
Sizes:
300mL Cartridges
600mL Sausages
10L Pails.
m707.pdf
(2248617 Bytes)
Download
|
BJ201 A flexible, fire resistant barrier for seismic & other movement gaps in walls and floors. Fire resistance ratings of 2Hrs for gaps up to 100mm and 1Hr rating for gaps to 130mm.
NOTE: All joints to be sealed with intumescent sealant.
Code FRR Gaps up to:
BJ201-2-40 -/120/120 40mm
BJ201-2-60 -/120/120 60mm
BJ201-2-100 -/120/120 100mm
BJ201-1-130 -/60/60 130mm
bj201.pdf
(96414 Bytes)
Download
|
Firepro B214 Stoplite A fire stopping system for application to voids between slabs and curtain walls.
NOTE: All joints to be sealed with intumescent sealant.
b214.pdf
(1380681 Bytes)
Download
|
Firepro B215 These strips are primarily designed for filling the gap between the top of firewalls and the roof or beams.
NOTE: All joints to be sealed with intumescent sealant.
Sizes:
900mm x 128mm for 90 min FRL
900mm x 150mm for 120 min FRL
900mm x 165mm for 240 min FRL
In 38mm, 50mm, 75mm & 100mm Thicknesses.
b215.pdf
(73423 Bytes)
Download
|
Fixing Brackets (for B214 & B215). L Bracket available from 60mm up to 190mm
Z Bracket available from 25mm up to 190mm
|
FF102 Ventilated Fire Barrier The FF102 Ventilated Fire Barrier is a high expansion intumescent seal offering industry leading performance as a ventilated cavity fire barrier.
|